Before you request samples or commit to tooling, the brief needs four things: the outcome you want, the application limits, the evidence that proves acceptance, and who can approve each stage. Tooling means product-specific equipment such as moulds or cutting dies. A sample request should answer one specific question, not simply ask whether the product looks good.
Define the outcome and application boundaries
Start with who will use the accessory, where and why. Translate “easy to install” or “retains its appearance after cleaning” into an agreed check, including the method and acceptable result. Government product-development guidance recommends defining the problem and using prototype testing and customer feedback to refine the design.[1]
State included and excluded applications, installation methods, available space, attachment points and operating conditions. Mark unconfirmed applications as awaiting validation; evidence from one application should not be treated as approval of the entire range.
Provide available drawings or measurements and arrangements for evaluating representative applications. Include target cost, expected purchasing needs and the intended launch date. Ask the supplier to identify missing inputs and dependencies. A target date is not an agreed development turnaround.
Briefs are usually written per category, because the boundaries differ — floor mats, exterior guards and ute tub liners are scoped in different terms.
Set appearance, material and permission requirements
Provide references for colour, texture, finish, material and branding position. Distinguish essential requirements from preferences, define acceptable variation and identify who may approve a material or process substitution.
Confirm permission to use supplied artwork, drawings and brand marks, including permitted products, markets and any limits on sharing them with manufacturers. An intellectual property licence gives permission to use IP; it does not transfer ownership.[3]
Do not assume paying for development transfers all design rights. IP Australia recommends written agreements before work starts covering ownership, commercial use and confidentiality.[2] Agree tooling ownership, custody and access separately; these should not be inferred from design ownership or a sample payment.
Specify what each sample must prove
Agree these working definitions in the brief, because supplier terminology may differ. A material or appearance sample confirms selected attributes, not the complete accessory. A prototype is an early version used to explore the design or function; its materials and manufacturing method may differ from production.
A production sample should state whether it uses the intended production materials, process and tooling, and disclose any differences. A master sample is an approved physical reference retained for later comparisons. It supports, rather than replaces, the approved drawings and inspection requirements; it is not a safety certificate.
For each request, record the sample label, revision, purpose, represented applications and limitations. An appearance-only sample cannot settle installation or functional questions. Decide which evidence is needed before tooling expenditure and which checks require a production-representative sample afterwards.
Record decisions, control revisions and complete handover
Name the technical, brand and purchasing decision-makers. Separate appearance acceptance, installation or functional acceptance, tooling authorisation and production release. A tooling authorisation permits the agreed tooling work; it is not permission to begin saleable production.
For each decision, record the sample and drawing revision, application assessed, evidence, approver and date. Evidence might include measurements, installation checks, photographs and user feedback. Record unresolved issues and their owners. If acceptance is conditional, specify what may proceed and what remains blocked.
Log changes to geometry, materials, branding or process, including the reason, affected requirements and cost or schedule implications. Obtain approval of the new revision and agree whether resampling or repeat checks are needed. Withdraw superseded instructions from use.
At final handover, agree the approved drawings, material and branding specifications, master-sample storage, inspection criteria, installation or care instructions, and ownership of any outstanding actions. Nominate responsibility for the separate compliance review; detailed standards belong in the compliance resource.
Your five-item briefing checklist
Complete these fields before requesting a sample or authorising tooling:
- Outcome: User, use case and measurable acceptance criteria: ___
- Application: Included/excluded range, installation constraints and evaluation inputs: ___
- Specification and permissions: Appearance/material references, allowed substitutions and authorised use: ___
- Sample and decision: Purpose, representativeness, evidence, named approvers and tooling-release conditions: ___
- Revision and handover: Change approval, retained master sample, production-release requirements and final documents: ___
Frequently asked questions
Can we request a sample before the brief is complete? Yes, if its purpose and limitations are agreed. Request an exploratory sample and a list of missing inputs; do not treat it as production approval.
Does approving a sample authorise tooling or production? Not by itself. Record those authorisations separately, with their scope and conditions. Appearance approval may leave installation, function or production-process questions unresolved.
Send Southern Oasis your draft brief and outstanding questions to discuss the appropriate evaluation and approval steps.
General information only, not legal advice, fitment certification or a guarantee of development outcomes. Agree project-specific requirements and commercial terms in writing.
Sources
[1] Australian Government — Develop a new product[2] IP Australia — Who owns IP?[3] IP Australia — How to license my IPLinks were checked when this guide was reviewed. They are provided for reference and do not constitute endorsement.